Standard størrelse: 240cm x 120 cm/240 cm x 90 cm/240 cm x 60 cm eller anden tilpasset størrelse.
boat decking are made from high quality EVA foam. It has advantages of good cushioning, stødmodstand, heat insulation, non-skid, stødabsorbering, salt water proof. Not easy deformation, tear or damage. use a cutting tool to cut any size for installation. This pad with strong adhesive on the back (please keep the installation site clean). Very easy to cut and hard to fall off after cutting, and it is flat and beautiful. Note: The boat flooring can be flattened with heavy objects before being installed to prevent it from curling to affect the installation effect.
EVA bådgulve, Odourless, Ikke giftig, Elastic, Not easy deformation.
EVA Faux Teak Decking Sheet Stain resistant & very easy to maintain, can also be pressure washed.
EVA Foam Decking Sheet is easy to Install and provides a non-slippery surface for your boat in both wet & dry conditions.
Funktioner:
1.High-quality EVA(Ethylene-vinyl Acetate) environmental protection materials.
2.Elastic, not easy deformation.
3.High tensile elongation, not easy to tear.
4.High Density, not easy to damage.
5.Smooth surface, colorful.
6.Odourless, ikke-giftige.
7.Self-adhesion, easy to installation.
8.Stain resistant & very easy to maintain, can also be pressure washed.
9.Provides a non-slippery surface for your boat in both wet & dry conditions.
10.Closed cell structure, non-absorbent, fugtsikker, good water resistance.
11.Resistant to seawater, grease, acid, alkali and other chemicals corrosion.
12.Good shock / cushioning performance.
13.Can be resistant to cold and exposure.
14.On the back of the pad with strong adhesive, simple installation, convenient and firm, you can easily get.
15.Perfectly decorate your boat.always shows your charming and highlight your boat.
Installation requirements: First,make sure that the area of the deck is clear,not dirty,no oil,on wax, and no wet before install the product. Besides,the surface of the deck can’t be used on a non-skid surface. Second, it is need to use an additional structural adhesive before you installing this EVA Foam on the deck. Or it is need to coat primer before the installation. Otherwise, it will directly affect the stickiness of the product sticking to the deck.
Forespørgselsformular ( vi vender tilbage hurtigst muligt )
